SMPS
Products Electrical Products SMPS
|
|
We are reckoned as one of the most prominent SMPS Suppliers in India. various countable features of SMPS Power Supply like switching of input voltage between 110V to 230V and output voltage at 24V DC, 12V DC and 5V DC, has attracted various national as well as international clients to place huge and repeated orders. Additionally, we are also counted among the most eminent Switch Mode Power Supply Exporters renowned at international level.
Characteristics
- Voltage and load regulation betterthan 1%
- PWM Technology
- 150m V output voltage ripple @20MHz
- Either universal input voltage (85-270VAC)OR switch selectable from 85-130V AC TO 190-270V AC
- Inbuilt EMI filter complying with EN55022-class B emissions
- Overload protection and short circuit protected
- Robust construction using latest high reliability solid state electronic components
- Mounting using M3 or M4 screws
- High reliability using high temperature electrolytic capacitors.
|
Technical Data
| Input voltage | 85-5 30V AC /190- 270V AC [selectable by inbuilt switch). | | Output Voltage | 24V DC or 12V DC or 5V DC, Adjustable up to +/-10% with inbuilt Potentiometer | | Line regulation | Better than 1% from low line to high line | | Load regulation | Within 1% of output from 0% to 100% rated load. | | Efficiency | About 82% at full load | | Protection | over load protection 125-135%
Short circuit protected, automatic recovery when short circuit removed. | | Leakage current | Less than 3.5 mA at 230V AC input for all models | | Inrush current | 25A at 110V, 50A at 230V | | Isolation | 1500VAC for 1 minute between input and output
1500 VAC For 1 minute between input and safety earth
500 VAC For 1 minute between output and safety earth | | Insulation Resistance | Tested for 100 mohm at 500VDC | | Wire Connections | 12-22 AWG cable connections on 9.5 mm pitch termincal block | | EMI/EMC | Tested according to EN55022 Class B | | Enclosure Material | Chassis-Aluminium.
Cover-steel with corrosion resistant plating | | Hold Time | At least 20 msec at rated load | | Mounting | 3 M3 screws (side mounting),4 M3 screws (Bottom Mounting) | | Temperature | storage temperature:-20 to 95oC working temperature 10 to 650C | | Warranty | 18 months from date of purchase. |
|
| |
|
|
PRODUCTS
