Electronic Timers K Series P-1
Products Electrical Products Electronic Timer Electronic Timers K Series P-1
|
|
|
|
Technical Data :
| Opration mode | Delay on energise(DE). The relay energises after set interval of time.
Interval on (IT). The relay energises immediately and de-energises after set interval.
Cyclic (CY). The relay energises and de- energises in cyclic mode for equal ON and OFF time as per the dial setting.
Immediate cyclie (IC).The relay energises immediately for the set on time and de-energises for the set OFF time in a cycling mode.
Delayed cyclic (DC). The relay remain de- energises for the set OFF time and energises for the set ON time in a cycling mode. | | Supply voltage | 12,24,48,110,230V AC,50Hz
12,24,48,110V DC
Multi voltage-24v to 220V AC/DC | | Supply voltage | ±10% | | Power consumption | 5V A(max) | | Time range | 1,2,5,10,30,60. seconds
2,5,10,30,60 minutes
2,5,10,30,60 hours | | Repeatability | 1% with fixed off time between runs. | | Reset time | Less than 100ms before timing. 15 ms. After timing. | | Scale range | 2% to 100% | | Relay | DPDT | | Contact rating | 5A at 230V AC /28V DC resistive load | | Transient protection | 120mj energy pulse | | Dielectric strength | 1500V AC rms.for 1 minute | | Temperature range | -10oC to +60oC | | Electrical life | 0.1 Million operations at rated resistive load | | Mechanical life | 5 Million operations |
|
| |
|
|
PRODUCTS
